Description
A concentrated food-safe acid based cleaner and descaler developed for use in kitchens and food processing areas. Ideal for descaling, kettles, boilers, dish and glass washing machines, ice makers, bain maries and most other catering equipment. Works equally well in hard and soft water conditions. Safe to use on stainless steel surfaces and suitable for cleaning stainless steel sinks, cladding etc. It removes lime scale build up and spotting caused by hard water quick and effectively. Regular cleaning and descaling of catering equipment improves their efficiency prolongs their life and reduces running costs.
- Odourless and non-tainting – for use in food processing areas.
- N0 nasty fumes.
- Effective action – Quickly dissolves lime scale and hard water spotting.
- Safe to use on stainless steel equipment and surfaces.
- Concentrated – Economical to use.
- Solutions can be used several times.
- Prolongs life of catering equipment and saves money.
Kettles: Fill with water and boil. Disconnect power supply. Pour in up to 1 cupful of descaler, depending on level of scale build-up. Leave to work. When fizzing stops process is finished. Empty out contents and rinse thoroughly with clean water.
Bain Maries, boilers etc.: Warm water, disconnect power and pour in concentrate at the rate of 1 litre for every 15 – 20 litres of water. When scale is removed rinse thoroughly.
Dish & Glass Washing machines : Disconnect dosing units. Fill with water and pour in concentrate at a rate of 1 litre to 20 litres of water. Switch machine on and run for 10 minutes. Drain off contents and fill with clean water. Run for 5 minutes.
Automatic machines: Disconnect power supply. Pour in a solution, made up in advance containing 250mls per 5L of warm water. Leave for 20 to 30 minutes. Drain the machine and rinse several times with clean water to remove all residues.
Stainless steel surfaces: Make up a solution of 1 part of Descaler mixed with between 5 and 10 parts of water. Apply onto surface by wiping, mopping or spraying.
Allow to remain in contact for a few minutes without allowing it to dry. Agitate if necessary with a brush and rinse off thoroughly with clean water.
Where scale is heavy more than one application may be necessary. It also may be necessary to agitate and scrub surface with a soft brush.
Always wear appropriate safety clothing (PPE) including gloves when handling concentrated chemicals.
Do not allow descaler to dry out on aluminium surfaces. Do not use on magnesium alloy or anodised surfaces.
